Request a quote

About us

A factory built for the difficult pieces

For 30 years we have been making furniture in Silla, a few kilometres from Valencia. Our 2,000 m² factory brings together engineering, machining, cabinetmaking, finishing and assembly: the whole process under one roof.

Visit the factory

In short

Eban Premium S.L. is a furniture factory at C/ Acequia Real del Júcar 12-A, Silla (Valencia, Spain), with a 2,000 m² plant, a 5-axis CNC machining centre and an in-house technical team. It has been making bespoke and series furniture for 30 years.

We develop the piece from scratch

We don’t need a production drawing: we start from a sketch, a photo or an idea, design it in 3D, program the CNC and make it. The whole development happens in our own factory.

3D model of a table made of polygonal pieces, split into board layers to program its CNC machining

Polygonal table · Layered design

We split the model into layers

We model the table in 3D, split it into board layers and program the toolpaths of the 5-axis machining centre, checked on screen before the first board is cut.

Solid oak pieces with rounded edges stacked at several heights in the Eban Premium factory

Polygonal table · Manufacturing

Machining and assembly in the workshop

Each solid oak piece is machined on the CNC and dry-assembled in the factory to check they all fit before finishing.

Coffee table made of polygonal solid oak pieces stacked on several levels, in a living room with a microcement floor

Polygonal table · Result

The finished table

Hand sanded and finished, the table becomes a single piece of furniture made of pieces that fit together.

3D model of an organic coffee table with three conical legs, designed by the Eban Premium technical office

Organic table · 1 3D design

We model the piece in 3D

Our technical office models every piece in 3D from the client’s sketch, drawing or idea, and solves joints, fittings and cutting lists before anything is made.

Organic solid oak table being machined layer by layer on the 5-axis CNC

Organic table · 2 Machining

We machine complex shapes

The 5-axis CNC carves solid wood, board and solid surface: organic shapes, rounded edges and joints to tenths of a millimetre, impossible to achieve by hand.

Organic-shaped solid oak coffee table with a small tree in its central opening, machined on a 5-axis CNC by Eban Premium

Organic table · 3 Result

The finished piece

Sanding, finishing and assembly in our factory. The result is a piece true to the design, and repeatable when the project calls for a series.

Meet the technical office →

History

Technical team

A technical office that draws, details and solves every piece before it is made, and a team of 12 to 15 people in the workshop.

Machinery

SCM Morbidelli m100 5-axis CNC machining centre, SELCO panel saw, CEHISA edge bander, press and lacquer booth.

From drawing to installed piece

  1. Study
    We review drawings, use and budget.
  2. Engineering
    Shop drawings, cutting lists, materials and hardware.
  3. Prototype
    A sample to approve dimensions, finishes and joints.
  4. Manufacturing
    Production in our own factory, one-off or series.
  5. Installation
    Delivery, installation and final inspection on site.

Walk through the workshop →

Quality and standards

We work with certified timber (FSC), low-formaldehyde panels (CARB2), water-based finishes and hardware with the most demanding strength and quality certifications.

Quote

Visit the factory

We welcome designers and clients by appointment. Come and see how we work before your project starts.

Book a visit